The normal operation of the vehicle underbody security inspection equipment is the prerequisite for ensuring safety. To guarantee that the equipment can be in good technical condition,Regular maintenance and inspection of the equipment should be carried out, and the products should be used in a standardized manner to achieve the best drawing effect of the equipment. First of all, when cleaning and maintaining the equipment on a regular basis, do not disassemble it privately. The vehicle underbody security inspection equipment of Seenboom adopts a water-tight compartment structure design like an aircraft carrier and has built-in waterproof and moisture-proof functions. Disassembling it privately will affect its performance. The second point......
Vehicle underbody security inspection equipmentThe normal operation is the prerequisite for ensuring safety. To guarantee that the equipment can be in good technical condition,Regular maintenance and inspection of the equipment should be carried out, and the products should be used in a standardized manner to achieve the best drawing effect of the equipment.
First of all, when cleaning and maintaining the equipment on a regular basis, do not disassemble it privately. The vehicle underbody security inspection equipment of Seenboom adopts a water-tight compartment structure design like an aircraft carrier and has built-in waterproof and moisture-proof functions. Disassembling it privately will affect its performance.
Second, it is necessary to check frequentlyUnderground systemCheck if the drainage is smooth to prevent the equipment from being soaked by accumulated water for a long time.
Thirdly, the controller and server are placed in the chassis to reduce the entry of dust and the impact of high temperatures. Regularly vacuum and ventilate the equipment to ensure its stable operation in an appropriate temperature and humidity environment.
Fourth, when vehicles pass by the equipment, pay attention to the direction of passing and guide the vehicles to pass over speed bumps. When shutting down, make sure to turn off the main unit first and then the power supply. After the power is completely off, remove all the wires connecting the devices.
