The entire inspection process of the vehicle chassis is carried out through program customization. Users can design and configure auxiliary equipment (such as doors, scene cameras, signal lights, ground coils, etc.) according to the detection site, and then use the host to compile the entire detection process to meet the needs of various detection sites. When the vehicle sees the green light and enters the inspection site, the vehicle underbody scanner starts working: the lighting equipment is triggered to turn on, and the vehicle underbody scanning camera begins to scan and upload the image to the system control host......
The entire inspection process of the vehicle chassis is carried out through program customization. Users can design and configure auxiliary equipment (such as doors, scene cameras, signal lights, ground coils, etc.) according to the detection site, and then use the host to compile the entire detection process to meet the needs of various detection sites.
When the vehicle sees the green light and enters the inspection site, the scanner under the vehicle starts working: triggering the lighting equipment to turn onVehicle chassis scanning cameraStart scanning and upload the image to the system control host. Sense of locality 2 When the rear of the vehicle is detected, the lighting equipment is triggered to turn off.Underbody scanning cameraStop the scanning. The system control host will fully display the image under the vehicle on the screen and automatically archive it. The vehicle will stay in front of the gate and wait for release. At this point, the operator can perform various operations on the image, such as local magnification and image comparison, for judgmentVehicle chassisWhether prohibited items or personnel are carried. If no problem is found, open the gate and let the vehicle pass through the ground3 The barrier gate automatically dropped, and at the same time, the traffic light turned green, waiting for the next vehicle to arrive.
